Table of Contents
Advertisement
3 Before you start using your
pressure washer
3.1 Mounting of quick
coupling
3.2 Mounting of high pres-
sure hose on spray gun
1. Screw the quick coupling
(12) tight on to the water inlet
(2).
Note: The inlet fi lter must al-
ways be fi tted in the water inlet
pipe to fi lter o t sand, lime stone
and other impurities as these
will damage the pump valves.
Caution: Failure
to fi t the fi lter will
invalidate the
guarantee.
1. Screw the high pressure
hose on to the spray gun.
EN
5
Advertisement
Table of Contents
