Pressure Regulation With Tornado Plus Lance And Powerspeedvario Plus Lance; Plus Lance; Using Cleaning Agents - Nilfisk-Advance MC 5M Instructions For Use Manual

4.3 Pressure regulation
with Tornado Plus
lance and
PowerSpeedVario Plus
lance.
4.4 Pressure
regulation with the
FlexoPowerPlus
nozzle head and the
PowerSpeedVario Plus
lance.
4.5

Using cleaning agents

Options / model variants
1)
Original instructions
MAX
CHEM
MAX
CHEM
NOTE!
Never allow cleaning agent
to dry on the surface to be
cleaned. The surface may be
damaged.
1. Turn the twist grip on the
lance:
– High pressure =
clockwise (+)
– Low pressure =
anticlockwise (–)
1. Twist cap of the FlexoPower-
Plus nozzle head:
– High pressure = MAX.
– Low pressure = MIN.
(CHEM)
Cleaning agent can be drawn
in via the injector installed as
standard only in low-pressure
mode:
1. Dilute cleaning agent accord-
ing to the manufacturer's in-
structions.
2. Tornado Plus lance and Pow-
erSpeedVario Plus lance
Set pressure regulation on
spray lance to low pressure
(–), or FlexoPowerPlus
nozzle head :
1)
Turn cap of the FlexoPow-
erPlus nozzle head towards
„CHEM" up to the stop.
3. The intaken volume of clean-
ing agent can be regulated by
turning the metering valve.
4. Select tank A by turning the
merering valve on "A-side".
Select tank B by turning the
metering valve on "B-side"
5. Main switch
Turn the switch to position
" I ".
6. Operate the spray gun.
MC 5M - MC 6P - MC 7P
1) :
13