Step 5: Manage The Cabling - enphase IQ8 Installation And Operation Manual

Microinverters

Hide thumbs Also See for IQ8:

Table of Contents

After you have created the installation map, use the Enphase Installer App (mobile app) to record

serial numbers and configure the system.

For details, refer to "Detect the Microinverters" in the help topics of the Enphase Installer App.

A. Peel the removable serial number label from each microinverter and affix it to the respective

location on the paper installation map.

B. Peel the label from the IQ Gateway and any IQ Battery (if installed) and affix it to the

installation map.

Always keep a copy of the installation map for your records

Step 5: Manage the cabling

A. Use cable clips or tie wraps to attach the cable to the racking. Leave no more than 1.8 m (6 ft)

between cable clips or tie wraps.

B. Dress any excess cabling in loops so that it does not contact the roof. Do not form loops

smaller than 12 cm (4¾") in diameter.

WARNING: Tripping hazard. Loose cables can become a tripping hazard. Dress the IQ Cable

to reduce this risk.

Enphase IQ8, IQ8+, IQ8M, IQ8A, and IQ8H Microinverters

Cable clip

Affix serial number labels

January 2024

IOM-00068-1.0

Table of Contents

Iq8+Iq8m Iq8a Iq8h