Changing The Operating Mode - Yaesu VX-7R Operating Manual

A
DVANCED
The VX-7R provides for automatic mode changing when the radio is tuned to different
operating frequencies. However, should an unusual operating situation arise in which you
need to change between the available operating modes (FM-Narrow, FM-Wide, and AM),
here is the procedure for doing so:
1. Press the key, then press the
2. Rotate the DIAL to select the Menu Item labeled (Basic
Setup #4: RX MODE).
3. Press the or
size. The available selections are:
AUTO: Automatic mode setting per default values for the selected frequency range..
N-FM: Narrow-bandwidth FM (used for voice communication)
W-FM: Wide-bandwidth FM (used for high-fidelity broadcasting)
AM:
Amplitude Modulation
4. Press the PTT key to save the new setting and exit to normal operation.
Unless you have a compelling reason to do so, leave the Automatic Mode
Selection feature on so as to save time and trouble when changing bands. If
you make a mode change for a particular channel or station, you can always
store that one channel into memory, as the mode setting will be memorized along with
the frequency information.
26
O
PERATION
C
HANGING THE
key to select the new channel step
O M
PERATING ODE
key to enter the Set mode.
VX-7R O M
PERATING ANUAL