Labeling Memories - Yaesu VX-7R Operating Manual

M M
EMORY
R
EGULAR

Labeling Memories

You may wish to append an alpha-numeric "Tag" (label) to a memory or memories, to aid
in recollection of the channel's use (such as a club name, etc.). This is easily accomplished
using the Set mode.
1. Recall the memory channel on which you wish to append a label.
2. Press the key, then press the
3. Rotate the DIAL to select the Menu Item labeled (Basic Setup #11: NAME SET).
4. Press the key momentarily to enable programming of
the name tag.
5. Press the /
select the first digit of the desired label.
Example 1: Press the
available characters.
Example 2: Press the
ters associated with that key: A à B à C à a à b à c à 2
6. Rotate the DIAL one click clockwise to move to the next character.
7. Repeat steps 4 and 5 to program the remaining letters,
numbers, or symbols of the desired label. A total of eight
characters may be used in the creation of a label.
8. When you have completed the creation of the label, press
the PTT key to save the label and exit.
During "MR" (Memory Recall) operation, the al-
phanumeric Tag will appear below the frequency
display. The alphanumeric Tag does not appear if
you activate the Dual Receive Operation.
48
ODE
M
EMORY
key, or one of the keyboard keys, to
key, then press the
key repeatedly to toggle among the seven available charac-
C O
HANNEL PERATION
key to enter the Set mode.
or
VX-7R O
key to select any of the 61
M
PERATING ANUAL