Yaesu VX-7R Operating Manual page 91

TSQ/DCS/DTMF #6 [ SPLIT TONE ]
Function: Enables/disables split CTCSS/DCS coding.
Available Values: OFF/ON
Default: OFF
When this Menu Item is set to ON, you can see the following additional parameters after
the "DCS" parameter while selecting the Menu Item (TSQ/DCS/DTMF #1: SQL TYPE),:
D CODE: DCS Encode only (" " icon will appear while operating)
TONE DC: Encodes a CTCSS Tone and Decodes a DCS code
(the "
DC TONE: Encodes a DCS code and Decodes a CTCSS Tone
(the "
Select the desired operating mode from the selections shown above.
TSQ/DCS/DTMF #7 [ DTMF DIALER ]
Function: Enables/disables the DTMF Autodial feature.
Available Values: ON/OFF
Default: OFF
TSQ/DCS/DTMF #8 [ DTMF SET ]
Function: Programming of the DTMF Autodialer. See page 38 for details.
Scan Modes #1 [ CH COUNTER ]
Function: Selects the Channel Counter Search Width.
Available Values: ±5 MHz/±10 MHz/± 50 MHz/±100 MHz
Default: ± 5 MHz
Scan Modes #2 [ EDGE BEEP ]
Function: Enables/disables the Band-edge beeper while selecting the frequency by the
DIAL.
Available Values: ON/OFF
Default: OFF
When this Menu Item is set to "ON," a beep will sound when the frequency reaches the
band edge while selecting the VFO frequency by the DIAL.
VX-7R O
PERATING
" icon will appear during operation)
" icon will appear during operation)
M
ANUAL
S M
ET ODE
89