Yaesu VX-7R Operating Manual page 96

S M
ET ODE
Misc Setup #4 [ MON-F CHANGE ]
Function: Exchange the functions between the
side of the radio.
Available Values: FUNC/MONI
Default: FUNC
FUNC: The key is defined as the "Alternate" function key. Press the
activate the "Secondary" key mode. Meanwhile, the MONI key is defined as the
"Monitor" function, which overrides the Noise and Tone Squelch quieting sys-
tems.
MONI: The key is defined as the "Monitor" function, which overrides the Noise and
Tone Squelch quieting systems. Meanwhile, the MONI key is defined as the "Al-
ternate" function key. The "Secondary" key mode is activated while pressing and
holding in the MONI key.
Important Note: When you define the left side of the MONI key to be the "Alternate"
function ("MONI" selected), the "Alternate" function is activated while pressing and hold-
ing in the MONI key, NOT by pressing and holding in the MONI key for 2 second.
Example:
(1) To enter the Set mode, press the
(2) To store a frequency into a memory channel.
1. Select the desired frequency.
2. Press the
3. Rotate the DIAL to select the desired memory channel, as desired.
4. Press the
Misc Setup #5 [ EMG SET ]
Function: Select the alarms utilized when the Emergency function is engaged.
Available Values: BEEP+STROBE/BEEP/STROBE1/STROBE2/STROBE3/STROBE4/
STROBE5/BEAM
Default: BEEP+STROBE
BEEP+STROBE:
BEEP:
STROBE1:
STROBE2:
STROBE3, STROBE4, & STROBE5: Flashes the STROBE in white (3: Slow flashing,
BEAM:
94
key while pressing and holding in the MONI key. .
key while pressing and holding in the MONI key.
key to store the frequency into the selected memory. .
Loud "Alarm" sounds along with flashing of the
STROBE in sequential colors.
Loud "Alarm" sounds.
Flashes the STROBE in sequential colors.
Continuation changes the STROBE in sequential
colors.
4: Medium flashing, 5: Rapid flashing)
The STROBE glows continuously in white.
key and the MONI keys on the left
VX-7R O
PERATING
key to
M
ANUAL