Memory Group Operation - Yaesu VX-7R Operating Manual

R
EGULAR

Memory Group Operation

Memory Group Assignment
1. Recall the memory channel to be assigned to a Memory Group.
2. Press and hold in the
you want as the Memory Group for this channel.
3. Now memory channel data is copied into the Memory Group.
Memory Group Recall
1. Set the radio to the Memory mode on the "Main" Band by pressing the
necessary.
2. Press the
Special Memory Menu.
3. Rotate the DIAL knob to select the "2 MR Group" mode.
4. Press the PTT switch to activate the "Memory Group" mode.
5. Rotate the DIAL knob to select the desired Memory Group
("MG1" ~ "MG9").
6. Press the
Memory Group.
7. In the Memory Group mode of operation, you can only select memory channels in the
current memory group (up to 48 channels).
8. To change the Memory Group to another Group, press the
rotate the DIAL knob.
9. To exit from Memory Group operation, recall the Special Memory Menu (press
) then change its setting to "1 OFF."
VX-7R O
PERATING
M
EMORY
key for 1/2 seconds, then press the numbered key (
key, then press the
key momentarily to lock in the selected
M
ANUAL
M
C O
HANNEL PERATION
key to recall the
M
EMORY ODE
key, if
key momentarily, then
~ )
+
51