Yaesu VX-7R Operating Manual page 93

Measurement #1 [ SENSOR DISPLAY ]
Function: Selects the display of the sensor units' information.
Available Values: TIME/DC/TEMP/WAVE/BARO/ALTI/WX/OFF
Default: TIME
The barometric pressure (BARO), altitude (ALTI), and Weather (WX) informa-
tion require the optional SU-1.
Measurement #2 [ WAVE MONITOR ]
Function: Select the Wave Form to be monitored.
Available Values: ALL/RX SIGNAL/TX MODULATION
Default: ALL
ALL:
RX SIGNAL:
TX MODULATION: Indicates the TX Audio modulation wave form.
Measurement #3 [ TEMP UNIT ]
Function: Selects the measurement units for the Temperature sensor.
Available Values: °C/°F
Default: Depends on the transceiver version
Measurement #4 [ BARO UNIT ]
Function: Selects the measurement units for the Barometric Pressure sensor (requires op-
tional SU-1).
Available Values: hpa/mbar/mmHg/inch
Default: Depends on the transceiver version
Measurement #5 [ BARO OFFSET ]
Function: Correcting the Barometric Pressure (requires optional SU-1). See page 70 for
details.
Measurement #6 [ ALTITUDE UNIT ]
Function: Select the measurement units for the Altimeter (requires optional SU-1).
Available Values: m/ft
Default: Depends on the transceiver version
Measurement #7 [ ALTITUDE OFFSET ]
Function: Correcting the Altimeter (requires optional SU-1). See page 71 for details.
Save Modes #1 [ APO ]
Function: Setting of the Automatic Power-Off time.
Available Values: OFF/30 min/1 hour/3 hours/5 hours/8 hours
Default: OFF
VX-7R O
PERATING
Indicates the RX Audio wave form and TX Audio modulation wave
form.
Indicates the RX Audio modulation wave form.
M
ANUAL
S M
ET ODE
91