Manual Repeater Shift Activation - Yaesu VX-7R Operating Manual

A
DVANCED

Manual Repeater Shift Activation

If the ARS feature has been disabled, or if you need to set a repeater shift direction other
than that established by the ARS, you may set the direction of the repeater shift manually.
To do this:
1. Press the key, then press the
2. Rotate the DIAL to select the Menu Item labeled (Basic
Setup #7: RPT SHIFT).
3. Press the or
"–RPT," "+RPT," and "SIMP."
4. Press the PTT key to save the new setting and exit to normal operation.
Changing the Default Repeater Shifts
If you travel to a different region, you may need to change the default repeater shift so as to
ensure compatibility with local operating requirements.
To do this, follow the procedure below:
1. Press the key, then press the
2. Rotate the DIAL to select the Menu Item labeled (Basic
Setup #6: SHIFT).
3. Press the or
magnitude.
4. Press the PTT key to save the new setting and exit to normal operation.
If you just have one "odd" split that you need to program, don't change the
"default" repeated shifts using this Menu Item! Enter the transmit and re-
ceive frequencies separately, as shown on page 46.
28
O
PERATION
R
EPEATER
key to select the desired shift among
key to select the new repeater shift
O
PERATION
key to enter the Set mode.
key to enter the Set mode.
VX-7R O M
PERATING ANUAL