LifeSpan Delta 1.0 User Manual page 18

LUBRICATING THE TREADMILL
Warning: Ensure to unplug the electric treadmill before undertaking any cleaning or maintenance
procedures.
Cleaning: Regular and thorough cleaning is essential to extend the life of your electric treadmill. Follow
these steps:
1. Remove dust regularly to maintain cleanliness of various components.
2. Pay special attention to cleaning exposed parts on both sides of the running belt to reduce impurity
accumulation beneath it.
3. Ensure your sneakers are clean to prevent carrying foreign bodies under the running belt, avoiding
wear on the running board and belt.
4. Scrub the surface of the running belt with a soapy wet cloth. Take care not to splash water on
electrical components or beneath the running belt.
Warning: Always unplug the power supply before moving the motor protection cover. Open the motor
protective cover at least once a year for vacuuming and cleaning the motor.procedures.
Lubricating Oil for Running Belt and Electric Running:
Lubricating oil is pre-coated between the treadboard and running belt to enhance the electric
treadmill's lifespan and performance. Regular application of lubricating oil is necessary. Follow these
recommendations:
• Regularly inspect the board surface, and if damaged, contact our customer service centre.
• Apply lubricating oil between the running belt and treadboard based on the following schedule:
• Lightweight users (less than 3 hours per week): once a year.
• Middleweight users (3-5 hours per week): once every 6 months.
• Heavyweight users (more than 5 hours a week): once every 3 months.
Purchase lubricating oil from a local distributor or contact our company directly.
Note: For any other repairs, it is recommended to seek assistance from professionals.
18 | MAINTENANCE INSTRUCTIONS
Running
Belt
Board