Table of Contents
Advertisement
5. PROGRAM MODE
1. In standby mode, press the "PROG" key to select the "P01 (P01-P15)" mode. The window will display " P01-P15" for
1 second. After this, the "time" window will flash [30:00], and the time icon will illuminate, with a setting range of
5:00-99:00. Press to confirm.
2. A prompt from the buzzer (bi) indicates entry into the next stage. The system's speed changes with each
program segment. During this period, you can use "Speed +" and "Speed -" to adjust the speed. However, upon
entering the next segment, it will revert to the speed set for that segment.
3. As the time decreases to zero, the speed gradually slows down until it comes to a complete stop, accompanied
by a short bi every second. After 15 seconds, the window will flash and display "end." within 3 seconds, it will return
to standby mode.
6. FAT MODE
Body mass index (FAT) is a measure of the relationship between a person's height and weight, not the proportion
of his body. FAT is suitable for all men and women and provides a basis for people to adjust their weight together
with other health indicators.
1. In the standby state, press the "PROG" key continuously to enter the body mass index (FAT) detection function.
After entering the body fat test function, the window will display: F1, indicating that the gender is entered at this
time, and the window will display the default value. Users can set gender by adding and subtracting keys.
2. Press the mode key, and the window will display: F2, indicating entering the set age, and the window will display
the default value. Users can adjust their age by adding and subtracting keys.
3. Press the mode key, and the window will display: F3, which means to enter the set height. The window will
display the default value, and the user can adjust the height with the addition and subtraction keys.
4. Press the mode key, and the window will display F4, which means to enter the set weight. The default value will
be displayed in the window, and the user can adjust the weight with the addition and subtraction keys.
5. Press the mode key, and the window will display: F5, which means entering the function of testing body fat.
At this time, the window will display the corresponding body fat index within 8 seconds when holding the heart
rate board with both hands; When there is no heartbeat, the window displays "-", and when there is heartbeat, the
window displays the corresponding body fat index.
Display and Setting Range of each Parameter (Table 1)
Parameter category
Gender (F1)
Age (F2)
Height (F3)
Body weight (F4)
14
| ASSEMBLY INSTRUCTIONS
Default value
0 (Male)
25 years old
170 CM
70KG
Set range
1—2
10-99 years old
100—200 CM
20—150KG
Remarks
1= Male 2= Female
Advertisement
Table of Contents
