Kenwood TM-732A Instruction Manual page 22

5. Microphone
eo—
l
U.S.A. and Canada only
@@UP/DWN switches
These switches can be used to increase or
decrease the VFO frequency, the Memory
channel number, and the Tone frequency, etc..
@PTT(Push to Talk) switch
The transceiver will transmit whenever this switch
is depressed. Scan operations may be canceled
by pressing this switch without transmitting.
@LOCK
This key will deactivate all functions of the
microphone except the PTT function and DTMF
keypad.
©16-Tone DTMF keypad
These buttons are used to activate the DTMF
encoder.
22
@©PF(Programmable Function) key
This key has been preset at the factory to perform
the BAND SEL function. It can be reprogrammed
to perform any of the functions described on page
23.
Two additional functions can be assigned that are not
available on the front panel of the radio. These are
the MONITOR and ENTER functions. The MONITOR
function allows you to check for a clear frequency
before transmitting, regardless of the Squelch mode
that has been selected. The ENTER function allows
you to directly enter the desired operating frequency
using the DTMF keys on the DTMF Microphone.
MONITOR programming
Press and hold the F key on the front panel as you
turn on the power key.
ENTER programming
1. Turn the POWER switch OFF.
2. Press and hold the F key and the VFO key while
you turn the power switch ON.