Kenwood TM-732A Instruction Manual page 16

oe
| ) =e §—@
°
© bi ae a
ae
[3
(Press), @
NO Key
Function
Page
8
TONE/T.ALT _| Pressing this key selects the desired tone signalling mode: (T, CTCSS, OFF)
45, 60
This key is used to reverse the transmit/receive frequencies during repeater
9
REV/STEP
operations. This key will not function in the simplex mode.
a4
10 MUTE/ABC
This key is used to lower the receiver audio level by -20dB during transmit.
32
This key is used to select the band you wish to control with the front panel
switches, etc., without affecting the transmit band selection. (Use the BAND
11
C.SEL
SELECT keys to select the desired transmit beni
=
A green indicator will light to show which band will be controlled by the front panel
controls.
These eg are used to select the desired transmit band. They can also be used
BAND SEL
to select the control band. When one of these keys is pressed
the "PTT" ND
OS
¢ D
;
. :
12
indicator will flash in the selected frequency display as a visual indicator.
_
(Press)
A geen indicator will light to show which band will
be controlled by the front panel
controls.
13 SQL controls
Mose controls are used to independently adjust the squelch threshold for each
—
14
VOL controls
pues controls are used to independently adjust the receiver audio level for each
=
15 LOW/DIM
This key is used to select the transmit output power level.
27
16 POWER
This key is used to turn the transceiver's power ON or OFF.
=