Kenwood TM-732A Instruction Manual page 29

B® MEMORY BASICS
1. Storing Information into Memory
1-1. Normal Repeater Offset or
Simplex Channel Entry
Note: The TM-732A has been preprogrammed to
automatically select the proper offset according to the
ARRL Bandplan.
For example, 145.020 MHz is put into memory channel 5.
1. Press the upper BAND SEL key.
2. Select the desired receiver frequency, tone
information etc. (For example 145.020MHz)
GIS)
3. Press the F key momentarily. The F indicator will
light on the display, and a memory channel number
will appear.
4. Select any memory channel using the Tuning control
or microphone UP/DWN keys.
(For example: CH5)
W520 5
wOO0E
5. Press the MR key within 10 seconds of selecting the
memory channel number. The F indicator and
memory channel number will turn off. This signals
that the data has been properly stored in memory.
i
O
1-2. Odd Split Memory Channel
For example, put a receive frequency of 145.020 MHz and transmit
frequency of 145.620 MHz into memory channel 10.
1. Press the upper BAND SEL key.
2. Select the desired receiver frequency, tone
information etc. (For example 145.020MHz)
29