Kenwood TM-732A Instruction Manual page 53

Functions that operate when using the channel number display
Press the F key for longer
than one second, then press
below the listed key.
Hold down the F key, then
press the below listed key.
VFO/MP V: Scan restart
condition setting
REV/STEP: Automatic
paging cancel
MR/M: Memory channel
lockout
SHIFT/DTSS: DTSS code
setting/Paging
code setting
Hold down one of the
following keys, then switch
the power on.
TONE/T.ALT: Tone
frequency
selection
SHIFT/DTSS: Delay time
selection
LOW/DIM: S meter squelch
selection
BAND SEL V:Display on/off
Hold down the F key and
one of the following keys,
then switch the power on.
BAND SEL U:Display on/off
Press the key Press the key for longer than
momentaly. one second.
The bold function :
will be execuled MR/M: Memory scan
MR/M CALL: Callscan
CALL
F Press the F key, then the
SHIFT/DTSS below listed a key within 10
seconds.
TONE/T.ALT
f MHz/LOCK: Key lock
REV/STEP
é SHIFT/DTSS: DTSS/paging
MUTE/ABC setting
LOW/DIM MUTE/ABC: Automatic band
change setting
C.SEL
LOW/DIM: Illumination
BAND SEL V brightness
BAND SEL U selection
Tuning control C.SEL: Receive two signals
on the same band at
the same time.
SHIFT/DTSS: Tone alert
selection
LOW/DIM: The illumination
can be made
brighter by one
step
53