Automatic - Kenwood TM-732A Instruction Manual

144/440/430 mhz fm dual bander

Hide thumbs Also See for TM-732A:

Table of Contents

Select the individual code of the other station.

3-3.

Automatic Page Cancelling

10. Select P1 to P5 with the tuning control.

;

It is desirable to cancel the page function after your

11. Select the next Paging Code Memory you wish to

QSO begins. This transceiver is capable of performing

program as described in step 6-9 .

this task automatically once a call has been received

and you begin transmitting.

Function selection

Press and hold the F key, and then press the REV key.

@Q©

This completes the programming of the code selection.

For paging to work you must still program the radio to

custom for the codes.

12. Select code (P1 to P5) of the other station with the

tuning knob, then press a key other than

SHIFT/DTSS.

@The frequency display returns, and the selected remote station

code (P1 to P§) lights.

Paging is now available.

If you do not want to use paging, press the F key, then

press the SHIFT/DTSS key while the F indicator is on

(10 seconds).

Table of Contents

Tm-732e