Kenwood TM-732A Instruction Manual page 11

C.SEL; Control Selector
This key is used select which band
will be controlled by the tuning control,
etc.
POWER:
Turns the power
on and off.
LOw:
This key is used to select the
desired transmitter output power.
DIM: Dimmer
Used in conjunction with the F key
to select the desired front panel
display illumination intensity.
MUTE:
This key is used to reduce the
received audio level of one band,
when you are transmitting on the
other.
ABC: Automatic Band Change
Used in conjunction with the F key
to activate the ABC function. See
page 31 for additional information
on this function.
CALL:
Call channel. When this
key is pressed, the call
channel is selected.
F : Function
This key is used in
conjunction with other
front panel keys to
reconfigure the
transceiver. See the
charts on pages 15-19
for additional
information on the
various configurations.
SHIFT:
Selects the desired
transmitter offset for repeater
operation.
DTSS:
Dual Tone Squeich System
Used in conjunction with the
F key to activate the DTSS
system.
See page 61 for additional
information on this function.
TONE:
This key is used to
activate the sub-audible
tone encoder.
T.ALT:Tone Alert
Used in conjunction with
the F key to activate the
Tone Alert function. See
Page 71 for additional
information on this
function.
REV: Reverse
This key is used to reverse the
transmit/receive frequencies during
repeater operation. This key does
not function in the simplex mode.
STEP:
Used in conjunction with the F key
to program the tuning step size.
11