All Colors Are Too Light Or Too Dark - Xerox Phaser 7400 User Manual
Xerox phaser 7400: user guide
Hide thumbs
Also See for Phaser 7400:
- Service manual (682 pages) ,
- Evaluator manual (20 pages) ,
- Supplementary manual (8 pages)
Table of Contents
Advertisement
All Colors Are Too Light or Too Dark
Problem
Colors appear faded or too dark.
Solution
1.
Use a different TekColor correction in the printer driver.
Note:
Setting the TekColor correction to Automatic produces the best results for most
documents.
2.
If the problem continues, in the Xerox printer driver (Windows 2000 or later), select the
TekColor tab, click the More Options button, and then adjust the Lightness level.
3.
If the problem continues, calibrate the colors using the procedures on the Color
Calibration Tutorial page. To print the Color Calibration Tutorial page:
a.
Select Troubleshooting, and then press the OK button.
b.
Select
Print Quality
c.
Calibrate
Select
d.
Select
Tutorial
e.
Follow the instructions on the page.
See also:
Adjusting Color
on page 4-3
Problems, and then press the OK button.
Colors, and then press the OK button.
Page, and then press the OK button.
Phaser® 7400 Color Printer
4-12
Solving Print-Quality Problems
Advertisement
Chapters
Table of Contents
