Choosing Output Options; Output Tray Guidelines - Xerox Phaser 7400 User Manual

Choosing Output Options

This section includes:
■

Output Tray Guidelines

■ Offsetting Output on page 3-52
Stapling Output on page 3-53
■
■ Using the Hole Puncher
Output Tray Guidelines
The printer has an output tray on top of the printer and an output tray on the left side of the
printer. If your printer has a finisher installed, you can send output to the finisher to be
punched and/or stapled. Use the following guidelines to choose which output tray to use for
your print jobs:
Top Output Tray (Factory default)
Use for all paper and media types.
■
Use for paper and media sizes with heights
■
111 mm (4.4 in.) or more.
Delivers output facedown.
■
on page 3-50
on page 3-54
7400-028
Use for paper and media sizes with heights less
■
than 111 mm (4.4 in.).
Delivers output faceup.
■
Use to reduce curling of heavy paper or specialty
■
media.
Open the left-side output tray before selecting it
■
from the printer driver.
Phaser® 7400 Color Printer
3-50
Choosing Output Options
Left-Side Output Tray
7400-029