Transparency Images Are Too Light Or Too Dark; Colors Are Wrong - Xerox Phaser 8500N User Manual

Transparency Images Are Too Light or Too Dark

Problem
Text or graphics printed on transparencies are either too light or too dark.
Solution
1. Verify that Transparency is selected in the software application or in the printer driver.
2. On the control panel, verify that the tray containing the transparencies is set to print
transparencies:
a. Select Paper Tray
b. Select Tray 1 Setup
Paper Type, or
c. Select Transparency, and then press the OK button.
3. Use only recommended Xerox transparencies. See the Recommended Media List at
www.xerox.com/office/8500_8550support.
4. Print the Paper Tips page for more information about transparencies:
a. On the control panel, select Information, and then press the OK button.
b. Information
Select
c. Select Paper Tips

Colors Are Wrong

Problem
The color produced by the printer is wrong or differs from the color that it must match.
Solution
For information about color matching, go to www.xerox.com/office/8500_8550infoSMART.
Setup, and then press the OK button.
(and then Tray 1 Paper
Tray 4 Paper Type, and then press the OK button.
Pages, and then press the OK button.
Page, and then press the OK button.
Phaser® 8500/8550 Color Printer
4-8
Solving Print-Quality Problems
Type), Tray 2 Paper Type, Tray 3