Solving Print-Quality Problems; Light Or Dark Lines Or Smudges In One Color - Xerox Phaser 7400 User Manual

Solving Print-Quality Problems

This section includes:
■

Light or Dark Lines or Smudges in One Color

■ Dark Lines, Smudges, or Streaks Through All Colors
All Colors Are Too Light or Too Dark
■
■ Repeating Defects on page 4-13
■ Print Image Is Offset
Fusing Is Incomplete or Toner Is Flaking
■
■ Color Misregistration
■ Printed Area Does Not Fit on the Paper or Margins Are Incorrect
See also:
Knowledge Base at www.xerox.com/office/7400support
Light or Dark Lines or Smudges in One Color
Problem
Thin, light or white lines appear in only
one color.
Print a copy of the color test pages to determine whether the problem is in one color or more
than one color:
1. On the control panel, select Troubleshooting, and then press the OK button.
2. Select Print Quality
3. Select Color Test Pages, and then press the OK button to print the test pages.
■ If the problem appears in one color on the test pages, continue with the solution in this
section.
■ If the problem appears in more than one color on the test pages, see
Smudges, or Streaks Through All Colors
on page 4-12
on page 4-14
on page 4-15
on page 4-16
Thin, dark lines or smudges appear in
only one color when a light color is
faded or blended with black.
Problems, and then press the OK button.
on page 4-9.
Phaser® 7400 Color Printer
4-5
Solving Print-Quality Problems
on page 4-5
on page 4-9
on page 4-20
Dark Lines,