Repeating Defects
Problem
Marks or voids recur in only one color.
Solution
Print the Repeating Defects page to view instructions for correcting the problem. To print the
Repeating Defects page:
1.
On the control panel, select Troubleshooting, and then press the OK button.
2.
Select
Print Quality
3.
Select
Repeating
Defects, and then press the OK button.
The Repeating Defects page prints.
4.
Follow the instructions on the page to measure the distance between the defects and
identify the item causing the defects.
5.
Replace the item causing the defects.
7400-212
Marks of any color or voids recur uniformly in all
Problems, and then press the OK button.
Phaser® 7400 Color Printer
4-13
Solving Print-Quality Problems
colors and/or in non-printed areas.
7400-206
7400-210