Printed Area Does Not Fit On The Paper Or Margins Are Incorrect - Xerox Phaser 7400 User Manual

Printed Area Does Not Fit on the Paper or Margins Are Incorrect

Problem
The printed area appears outside the margins on the page.
Solution
1. In the paper tray, verify that the paper is loaded correctly and paper guides are adjusted to
fit the paper. For more information, see
2. On the control panel, select
3. Select the tray you are using, and then press the OK button.
4. Verify that the tray is set to the correct paper size.
5. If the problem continues, use the Calibrate Margins page to shift the print area on the
paper. The print area appears as a dashed rectangle on the Calibrate Margins page; the
printer does not print outside this rectangle.
a. On the control panel, select Troubleshooting, and then press the OK button.
b. Select Print Quality
c. Calibrate
Select
d. Select Calibrate Margins
e. Select the appropriate tray to calibrate, and then press the OK button.
f.
Follow the instructions on the Calibrate Margins page.
Loading Paper
Paper Tray Setup, and then press the OK button.
Problems, and then press the OK button.
Margins, and then press the OK button.
Page, and then press the OK button.
Phaser® 7400 Color Printer
4-20
Solving Print-Quality Problems
on page 3-8.