Xerox Phaser 7400 User Manual page 63

3. When the control panel prompts you to confirm the type and size of paper in the tray,
select Change setup, and then press the OK button.
a. Select Phaser 35-Series Transparency
OK button.
b.
Select the appropriate transparency size, and then press the OK button.
4.
In the printer driver, select Tray 1 as the paper source and/or select Transparency as the
paper type.
Printing Transparencies from Tray 2
1. Pull out the tray.
as the paper type, and then press the
Phaser® 7400 Color Printer
3-34
Printing on Specialty Media
7400-017