Transparency Images Are Too Light Or Too Dark; Colors Are Wrong - Xerox Phaser 8560 User Manual

Transparency Images Are Too Light or Too Dark

Possible Cause
Text or graphics printed on
transparencies are either too
light or too dark.
Note: Use only recommended Xerox transparencies.
See also:
Recommended Media List (United States)
Recommended Media List (Europe)

Colors Are Wrong

Possible Cause
The color produced by the
system is wrong or differs
from the color that it must
match.
1. Verify that Transparency is selected in the software application
or in the printer driver.
2. On the control panel, verify that the tray containing the
transparencies is set to print transparencies:
Paper Tray Setup
a. Select
b. Select one of the following options and then press the
OK button:
Tray 1 Paper
(When printing from Tray 1, you must also
■
select the appropriate paper size, Letter or A4, and then
press the OK button.)
Tray 2 Paper Type
■
Paper Type
Transparency
c. Select
3. Print the Paper Tips page for more information about
transparencies:
a. On the control panel, select
the OK button.
Information Pages
b. Select
Paper Tips Page
c. Select
See the Online Support Assistant for information about color
■
matching at www.xerox.com/office/8560Psupport.
See the Advanced Features Guide at
■
8560Psupport.
Phaser® 8560 Color Printer
4-10
Solving Print-Quality Problems
Solution
, and then press the OK button.
Tray 3 Paper Type
, , or
, and then press the OK button.
Information
, and then press
, and then press the OK button.
, and then press the OK button.
Solution
www.xerox.com/office/
Tray 4