Printing On Specialty Media; Printing Transparencies - Xerox Phaser 7400 User Manual

Printing on Specialty Media

This section includes:
■

Printing Transparencies

■ Printing Envelopes on page 3-37
Printing Labels on page 3-40
■
■ Printing Glossy Paper
■ Printing Custom Size Paper
For information about printing on other types of specialty media, see the
Advanced Features Guide at
Printing Transparencies
Transparencies can be printed from Tray 1 (MPT) and Tray 2. They should be printed on one
side only.
For best results, use only transparencies that are recommended for your printer. For more
information, see the Recommended Media List at
To order paper, transparencies, or other specialty media, contact your local reseller or go to
www.xerox.com/office/supplies.
Caution: Damage caused by using unsupported paper, transparencies, and other specialty
media is not covered by the Xerox warranty, service agreement, or Total Satisfaction
Guarantee. The Total Satisfaction Guarantee is available in the United States and Canada.
Coverage may vary outside these areas; please contact your local representative for details.
Guidelines
Remove all paper before loading transparencies in the tray.
■
■ Do not load more than 50 transparencies in Tray 1 (MPT). Do not load more than
200 transparencies in Tray 2. Overloading the tray may cause the printer to jam.
■ Handle transparencies by the edges using both hands to avoid fingerprints and creases,
which can cause poor print quality.
■ After loading the transparencies in the tray, use the control panel to change the paper type
to Phaser 35-Series
on page 3-32
on page 42
on page 3-45
www.xerox.com/office/7400support
www.xerox.com/office/7400support
Transparency.
Phaser® 7400 Color Printer
3-32
Printing on Specialty Media