All Colors Are Too Light or Too Dark
Problem
Colors appear faded or too dark.
Solution
1.
2.
3.
4.
See also:
Downloaded From ManualsPrinter.com Manuals
Use a different color correction in the printer driver.
Note:
Setting the color correction to Automatic produces the best results for most
documents.
Verify the print-quality mode selected is appropriate for the paper type.
If the problem continues, in the Xerox printer driver (Windows 2000 or later), select the
Color Options tab, click the More Color Adjustments button, and then adjust the
Lightness level.
If the problem continues, calibrate the colors using the procedures on the Color
Calibration Tutorial page. To print the Color Calibration Tutorial page:
a.
On the control panel, select
b.
Select
Print Quality Problems
c.
Select
Calibrate Colors
d.
Select
, and then press the OK button.
Tutorial Page
e.
Follow the instructions on the page.
Adjusting Color
on page 4-4
Phaser® 6360 Color Laser Printer
Troubleshooting
, and then press the OK button.
, and then press the OK button.
, and then press the OK button.
4-11
Solving Print-Quality Problems