Selecting Output Options - Xerox Phaser 7750 Reference Manual

Using CentreWare IS
To select a default tray:
1.
Launch your web browser.
2.
Enter your printer's IP address in the browser's Address field (http://xxx.xxx.xxx.xxx).
3.
Select Properties.
4.
Select the General folder on the left sidebar.
5.
Select Printer Defaults.
6.
Scroll to Print Mode Settings, then select the tray from the Paper Source drop-down list.
7.
Click Save Changes at the bottom of the screen.

Selecting Output Options

The Phaser 7750 printer has two output trays:
■ Top Output Tray: Sends prints to the Top Output Tray on top of the printer.
■ Finisher Output Tray (for Phaser 7750DN, 7750GX, and 7750DXF configurations
only): Sends prints to the Finisher Output Tray on the right side of the printer. This tray is
only available when the printer has the optional Finisher.
To select the output tray you want to use:
1.
At the printer's front panel, select
Paper Destination.
select
2. Top Output Tray
Select either
Note
The printer driver overrides the front panel settings for output tray selection.
Selecting Job Offset
The Finisher Output Tray and Top Output Tray can place sheets in alternate positions to
separate one print job from another. This is called job offsetting. There are several job
offsetting options from which to choose:
■ None: No job offsetting occurs and the output position is not changed for the output tray
selected.
■ With End of Job: The output position changes after the final sheet of the print job is
printed. The next print job is then offset to keep it separate from the previous print job.
■ With End of Set
■ With Collation Off: The job offset position changes after all copies of each sheet (one
page with single-sided printing, two pages with 2-sided printing) are printed.
■ With Collation On: The job offset position changes after each copy of all sheets in the
job is printed.
Note
When the stapling option is used for print jobs, job offsetting is activated.
Printer Setup, select
Finisher Output
or
Phaser® 7750 Color Laser Printer
1-20
Printer Settings
Paper Handling Setup, then
Tray, then press the OK button.