Choosing Output Options
This section includes:
■
■
■
Output Trays
The printer has one output tray located on the top of the printer. If a finisher is installed the
following output options are available:
■
■
■
■
Note:
goes to a finisher output tray.
Selecting an Output Tray from the Printer Driver
To select an output tray for a specific print job:
10.2 and higher
See also:
Downloaded From ManualsPrinter.com Manuals
Using the Hole Puncher
on page 3-51
Top output tray (horizontal transport)
Finisher upper output tray
Finisher stacker output tray
Finisher booklet output tray
If you select stapling or hole punching in the printer driver, the output automatically
1.
2.
Select the ouput tray from the Paper Destination drop-down list.
1.
In the Print dialog box, select Finishing Options from the drop-down
2.
Select the output tray from the Paper Destination drop-down list.
Stapling Output
on page 3-50
Using the Hole Puncher
on page 3-51
Choosing Output Options
3-48