Finisher Menu
Options
Figure 7
System Menu showing finisher-specific options only
Job Menu
Password Menu
Tray Menu
PCL Menu
PostScript Menu
System Menu
Parallel Menu
Ethernet Menu
Novell Menu
Test Menu
Reset Menu
*Factory defaults
When the finisher is installed, it is reflected in the System
Menu in two options: Output Destination and Staple Mode.
Those options are illustrated in Figure 7. Finisher tasks
performed with the System Menu are listed in Table 4 on
page 20.
Output Dest
Staple Mode
Finisher Bin 2
Face Down Bin*
Finisher Bin 3
Face Up Bin
Finisher Bin 1
Off*
Position 2
Position 1
Dual
19