Adding
Staples
1
Open the access door on the side of the
finisher.
Staple replacement and jam
clearance instructions are also
displayed on the panel behind the
access door.
24
X e r o x
D o c u P r i n t N 2 4 / N 3 2 F i n i s h e r U s e r G u i d e
The printer will pause during a stapling job when the staple
cartridge is empty. Follow these steps to place a new staple
cartridge into the finisher.
2
Place one hand under the cartridge. Use
your other hand to release the cartridge
from the finisher by pushing down on the
latch as shown.