Job Offsetting
The finisher, like the Face-Down Bin, supports offsetting
output between successive jobs or multiple collated sets of a
single job. A system parameter configures the offset function
to OFF (no offset), or ON (toggle offset portion of sequential
jobs or multiple collated sets of a single job.)
Job offset is a system function that cannot be configured by
the driver. It is configured via the User Interface or via SNMP
commands.
16
X e r o x
D o c u P r i n t N 2 4 / N 3 2 F i n i s h e r U s e r G u i d e