Printing From Windows Nt 4.0 - Xerox DocuColor 2060 Supplementary Manual
Guide to submitting jobs from the client
Hide thumbs
Also See for DocuColor 2060:
- Installation planning manual (218 pages) ,
- Administration manual (109 pages) ,
- Maintenance manual (88 pages)
Table of Contents
Advertisement
Printing from Windows NT 4.0
Guide to Submitting Jobs from the Client
Submitting print jobs using Windows NT 4.0 drivers
13. Click [Yes] to print a test page, or [No] to skip this option, then
click [Finish].
The selected printer is now installed, and a new printer icon
appears in the Printers folder. The test page prints to the
designated printer.
You can send documents to your DocuPrint printers from
Windows NT 4.0 in several ways:
•
From within your Windows applications, using the Xerox
DocuPrint PostScript level 2 printer driver.
•
From within your Windows applications, using the Windows
NT native printer driver and the appropriate DocuPrint NPS/
IPS PPD file (see list below).
•
From within your Windows applications, using a third-party
PostScript or PCL printer driver.
NOTE: If you use a third-party PostScript printer driver, some
drivers provide access to Xerox printer-specific features by
using the following Xerox PPD files:
– XDP4850.PPD
– XDP4890.PPD
– XDP92C.PPD
– XDP4050.PPD
– XDP4090.PPD
– XDP4635.PPD
– XDP180.PPD
– XDP96.PPD
•
From the Xerox Document Submission (XDS) software.
•
From the Xerox Quick Print software.
5-7
Advertisement
Table of Contents
