Xerox DocuColor 2060 Supplementary Manual page 39

Guide to Submitting Jobs from the Client
5. Find the client directory and command file for your client
platform in the table below.
Client platform
SunOS 4.1.x and 4.0
Sun Solaris
DEC ULTRIX 4.3 (MIPS)
HP 9000 HP-UX 10.01
RS 6000 IBM AIX 4.1
MS-DOS Sun PC-NFS
MS-DOS FTP
MS-DOS Wollongong
Pathway Access
6. Using the appropriate client directory and command file,
enter the following to access the printer controller using the
ftp guest account.
# ftp <printer controller name>
Name: <printer controller name:username>:ftp
Password: <RETURN>
ftp> ls
ftp> bin
ftp> cd <client directory>
ftp> get <command file>
ftp> quit
#
7. Change the mode and run the command file to perform the
installation. Enter the name of the printer controller to install
from, as follows:
#chmod +x <command file>
#<command file> <printer controller name>
8. Verify that line 1 of the /usr/xerox/NPS/IPS/client/cconf file
has the name of the printer controller. If it does not, edit line 1
to include the printer controller name (default).
9. In order to use the client commands (print, listq, and listjob)
verify that your path environment contains the directory /usr/
xerox/NPS/IPS/client/bin for the client commands. This
directory should precede all other directories in the path. The
installation script will also copy these three commands to /
usr/bin. In order to use the commands:
Setting up workstations
Client directory Command file
SUN4 instsun4
SOLARIS instsolaris
DEC__ULT instult
HP__UX insthpux
IBM__AIX instibmaix
MS__DOS__NFS instnfs.bat
MS__DOS__FTP instftp.bat
MS__DOS__PATH instpat.bat
WAY
2-11