Printing Using Lpr Utilities - Xerox DocuColor 2060 Supplementary Manual

Printing using Xerox utilities and lpr utilities (DOS and UNIX)

Printing using lpr utilities

Using lpr utilities
in DOS
Using lpr utilities
in UNIX
3-18
You may print a document using the following lpr utilities:
• lpr (DOS and UNIX)
• lpq (DOS and UNIX)
• lprm (DOS and UNIX)
• lpc (UNIX only)
To use these lpr utilities in DOS:
• If you are using FTP PC-TCP/IP software, these commands
are available. Refer to your software documentation for a
description of all the options available.
• If you are using the Wollongong Pathway Access network
communication package, you can use the lpr command to
print jobs, but the -C options are not available. Refer to the
documentation you received with your Wollongong software
for complete information.
• If you are using Sun PC-NFS, you may be able to submit jobs
to your printer, as long as your system administrator
configured the printer to do so. For complete information on
setting up the print capability, refer to your PC-NFS software
documentation.
• To check status of jobs, use the telnet utility.
To use these lpr utilities in UNIX:
• If you are using Sun PC-NFS, you may be able to submit jobs
to your printer, as long as your system administrator
configured the printer to do so. For complete information on
setting up the print capability, refer to your PC-NFS software
documentation.
• All UNIX commands and options are case-sensitive.
• To check status of jobs, use the telnet utility.
The following sections provide the syntax, required options, and
options for the lpr utilities commands lpr, lpq, lprm, and lpc.
Guide to Submitting Jobs from the Client