Xerox DocuColor 2060 Supplementary Manual page 80

Printing using Xerox utilities and lpr utilities (DOS and UNIX)
Examples
3-30
Following are several examples of using the lpr command.
NOTE: You may enter one or more -C options. You must enclose
these options in quotation marks and parentheses, and separate
them with commas and spaces.
The following example shows how to specify the paper size and
color, omitting other options:
lpr -Pps1 -C"(media=a4::blue)" test.ps
The following example shows how to specify multiple media:
lpr -Pps1
-C"(media=a4::white, media=a4::blue)"test.ps
NOTE: The remaining examples in this section apply only to
FTP software.
The following example shows the command line for printing five
duplex, stapled copies of a PostScript test document "test.ps" at
the printer "rushmore" on letter size paper:
lpr -S rushmore -#5
-C "(duplex, stitch, USLetter)" test.ps
NOTE: The following examples apply to models 4850/4890/92C
only.
The following example shows the command line for printing one
copy of a PostScript document "color.ps" containing red, blue,
and green components. The dry ink color loaded at the printer is
red. If you don't set the mc option to a color other than red, only
the red parts of the document are printed in red; the green and
blue parts are printed in shades of gray.
lpr -S rushmore color.ps
Guide to Submitting Jobs from the Client