Xerox DocuColor 2060 Supplementary Manual page 150

Submitting print jobs using Windows NT 4.0 drivers
5-22
2. Click the stock number you want to change.
NOTE: The check mark next to the stock number indicates
the stock currently in use by the job.
3. Define the Size, Type, and Color of the paper stock, and
whether to use drilled paper (refer to the sections that follow).
4. To save the parameters, click [OK]. To cancel your changes,
click [Cancel].
NOTE: Main stock (Stock #1) programming is performed on the
Setup window.
Guide to Submitting Jobs from the Client