Xerox DocuColor 2060 Supplementary Manual page 79

Guide to Submitting Jobs from the Client
Printing using Xerox utilities and lpr utilities (DOS and UNIX)
• -C"(yshift=<#>)"
Specifies the y (vertical for portrait USLetter or A4 page)
image shift from the lower left corner of the page towards the
top (in millimeters). Values may be positive(+) or negative (-).
NOTE: The specified image shift is applied to both front and
back sides of sheets unless -C"(yshiftback=<#>)" is also
specified, in which case the specified image shift is applied to
front sides of sheets only.
• -C"(yshiftback=<#>)"
Specifies the y (vertical for portrait USLetter or A4 page)
image shift from the lower right corner of pages imaged
towards the top (in millimeters), to be applied to the back
sides of sheets only. Values may be positive (+) or negative
(-).
• -f (DOS only)
Overrides any "Control-" characters in your document that
could interrupt printing. Use this option with the FTP software
package. Refer to the documentation you received with your
software to confirm support of this option.
• -h
Allows suppression of banner pages within a group of
documents sent by the same userid. This feature does not
work if the printer cycles down between jobs.
• -J<documentname>
Replaces the filename you specified with a new document
name on the cover sheet.
• -P<virtual printer name>
Specifies the virtual printer to which jobs will be submitted on
the specified printer controller.
3-29