Xerox DocuColor 2060 Supplementary Manual page 24

DocuPrint and DocuColor 2060 NPS/IPS client overview
Printing directly
from the
application
Using a print job
submission
program
1-4
Printing directly from the application (or driver, also known as
transparent printing) is easier than using a print job submission
program. However, depending on the application, this method
may not support all available print options such as number of
copies, simplex or duplex printing, and stitching. (Transparent
printing is done using one of the Xerox printer drivers, or by
using third-party drivers with the Xerox PPD file for your printer.)
Also, this method is available through some, but not all, platform
and application software configurations.
Print drivers for all NPS/IPS printers are included in the Xerox
Production Print Services (XPPS) software. For information on
XPPS drivers, refer to the Guide to Job Submission for Windows
and Guide to Job Submission for Macintosh. These documents
rae part of the Xerox Prodcution Print Service series.
Using a print job submission program requires a two-step
printing process. The user prints from the application to a PDL
file, then uses one of the following methods to submit the job and
specify print options:
• The lpr command provides options for submitting print jobs.
The functionality of the lpr command is dependent on the
TCP/IP software installed on the workstation.
• Xerox Client Software provides a print command for
submitting jobs and specifying print options. The functionality
of the print command is dependent on the TCP/IP software
installed on the workstation.
• Xerox Document Submission (XDS) software for the
Macintosh provides a graphical user interface for submitting
jobs and specifying print options.
For information on XDS software for the Macintosh, refer to
the Guide to Job Submission for Macintosh. This guide is part
of the Xerox Production Print Services series.
• Xerox Document Submission (XDS) software for ME,
Windows 2000, Macintosh operating system 8.6 or above,
and Windows 95 provides a graphical user interface for
submitting jobs and specifying print options.
For information on XDS software for Windows, refer to the
Guide to Job Submission for Windows. This document is part
of the Xerox Production Print Services series.
• XDS Plus software for Windows and Solaris 2.6 and 2.8
provides a Java-based graphical user interface for submitting
jobs and specifying print options via the Internet.
Guide to Submitting Jobs from the Client