Autel Skylink Image Transmission Function - Autel Robotics Alpha User Manual

Table of Contents

Advertisement

60
Chapter 3 Aircraft
 A-weighted sound pressure level
Measurement results for the Autel Alpha aircraft, in accordance with the requirements of GB
42590-2023 in China's Mainland, are provided below:
Table 3-14 Noise Measurements Results (normalized to 1 m from the aircraft)
Observation Points
Ground Measure Point
(Below)
Side Measure Point
(Horizontal Plane)
Note: The measurement environment is an outdoor cement ground.
Tip
 Before flight, please make sure to verify the noise restrictions in the flying area in advance
to avoid any violation of local regulations regarding aircraft noise.

Autel SkyLink Image Transmission Function

The Autel Alpha aircraft is equipped with Autel SkyLink 3.0 image transmission technology and
has 4 image transmission antennas, with 2 channels of transmitting signals and 4 channels of
receiving signals, so that the communication distance between the aircraft and the remote
controller can reach up to 15 kilometers.
 It supports adaptive frequency hopping transmission of multiple frequency bands, selects the
optimal channel according to the electromagnetic interference situation, and has strong anti-
interference ability.
 The quality of real-time transmission reaches 1080p/30fps, and it has a high transmission bit
rate of 64Mbps and low-latency transmission characteristics.
A-weighted sound power level of the Autel Alpha aircraft
Hover
80.4dB
78.0dB
Fly (1 m/s)
81.3dB
75.9dB

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Alpha and is the answer not in the manual?

Subscribe to Our Youtube Channel

Table of Contents