Flight Control Parameter Setting - Autel Robotics Alpha User Manual

108 Chapter 6 Autel Enterprise App

Flight Control Parameter Setting

In the sidebar of the "Settings" interface, tap the "
Setting" interface, where you can set the relevant flight control parameters for the aircraft, as
shown below.
 Set RTH Altitude
Tap the "RTH Altitude" edit box and enter the value. When executing an auto-return, the aircraft
will rise to the RTH altitude before starting the return process.
Warning
 Although the Autel Enterprise App allows you to set a flight altitude within the range of 20-
800 meters, this does not mean that the set altitude complies with local laws and
regulations.
 The RTH altitude should be set higher than the altitude of obstacles within the flight
operation area.
 The RTH altitude setting should comply with local (within the flight operation area) laws and
regulations.
 For information about adjusting the RTH altitude of the aircraft, see
Mechanism" in Chapter 2.
 Turn On/Off Altitude Limit
Tap the button on the right side of "Altitude Limit" to turn on or off the altitude limit function.
 If this function is turned on, enter the altitude limit value in the edit box of "Altitude Limit (20-
800m)" that pops up below, and the aircraft can rise up to the maximum altitude specified.
"Flight Control Parameter Setting" interface
" icon to enter the "Flight Control Parameter
"2.7.4 Auto-return