Cd-Rom Drive; Figure 3-2: Inserting And Ejecting A Cd-Rom Disc - Advantech PPC-150 Series User Manual

3.3 CD-ROM Drive

To insert a CD-ROM disc, press the eject button of the CD-ROM drive. The
yellow activity light will flash and the front panel will come out a short
distance. Using your fingertips, hold the top and bottom of the front panel
and pull it outward to the very end. (See Fig 3-2.) Align the center hole of the
CD-ROM disc with the center circle of the CD-ROM holding plate. Press the
transparent ring around the center hole of the CD-ROM until you hear a
click. Push the front panel of the CD-ROM drive back to its original place.
To eject a CD-ROM disc, first ensure that the drive activity light is off. Then
press the eject button on the drive. When the disc pops out of the drive,
remove it and store it properly.
CD-ROM
holding plate
CD-ROM

Figure 3-2: Inserting and ejecting a CD-ROM disc

Chapter 3 Using the Panel PC 27