Table of Contents
Advertisement
Specifications - JH 27T11 MMD-xxx-Axxx
PRODUCT SPECIFICATIONS - JH 27T11 MMD-xxx-Axxx
TFT Technology:
• High Quality SAMSUNG TFT
• 27.0 inch viewable image size - Widescreen, Aspect Ratio 16:10.
• Color Active Matrix, a-SI (amorphous silicon) Thin Film Transistor (TFT)
• S-PVA (Super Patterned Vertical Alignment) mode
TFT Characteristics:
• Pixel Number
: 1920 x 1200
• Pixel Pitch (RGB)
: 0.303 (H) x 0.303 (V) mm
• Response Time
: 6 ms (typical) G-to-G
• Contrast Ratio
: 1000:1 (typical)
• Light Intensity
: 500 cd/m2 (typical)
• Viewable Angle
: +/- 89 deg. (typical) (Up/Down/Left/Right)
• Active Display Area
: 581.76 (H) x 363.6 (V) mm
• Max Colors
: 16.7 millions
Synchronisation:
Sync Signal:
• Digital separate synchronisation
• Composite synchronisation
• Synchronisation on green.
• Auto detects VGA -> WUXGA, interlaced and non interlaced
• Video Signal
: Analog RGB 0,7Vp-p
: Input Impedance 75 Ohm
Synchronisation Range:
• Horizontal
: 15.0 kHz to 91.1 kHz
• Vertical
: 60 Hz* to 85 Hz
* Recommended for optimum picture quality
Supported Signals:
Resolutions:
• VGA
: 640 x 480 (including 640 x 350)
• SVGA
: 800 x 600 (including 720 x 400)
• XGA
: 1024 x 768
• SXGA
: 1280 x 1024
• UXGA
: 1600 x 1200
• WUXGA
: 1920 x 1200*
* Recommended for optimum picture quality. (60 Hz)
Video Signals (with HATTELAND® Multifunction Cable):
• Interlaced NTSC and PAL/SECAM video
• Composite video
Power Specifications:
Power Supply:
• 115&230VAC - 50/60Hz
Power Consumption:
Operating
: 200 W (max)
Typical Type Numbers:
• JH 27T11 MMD-AA1-AAAA
• JH 27T11 MMD-AA1-AOBA
Buzzer-Potmeter-Keypad
MMD-xxx-xxBx
For a full overview, please review our typenumber sheet found on our website:
http://www.hatteland-display.com/pdflink/ind100780-1.php
T E S T I N G / A P P R O V A L S
IEC 60945 4th (EN 60945:2002)
DNV - Det Norske Veritas
CCS - China Classification Society
IND100129-99
- JH 27T11 MMD-Axx-xxxx
= Standard AC, Keypad Controls only
= Standard AC, Bonded, Potmeter Controls+Buzzer
Keypad
MMD-xxx-xxAx
This product have been tested / type approved by the following classification societies:
ClassNK - Nippon Kaiji Kyokai
ABS - American Bureau of Shipping
LRS - Lloyd's Register of Shipping
Note: All specifications are subject to change without prior notice!
Physical Considerations:
• 660.00 (W) x 481.00 (H) x 101.50 (D) mm
• 25,98" (W) x 18,94" (H) x 4,00" (D)
• Weight: Approx 16kg (w/no brackets)
Signal Terminals:
• DVI-I Signal IN
: 1 x 29p DVI Female (or as RGB IN with adapter)
• RGB Signal IN
: 1 x 15p HD D-SUB (female)
• RGB Signal OUT
: 1 x 15p HD D-SUB (female) - Clone of RGB IN**
• Multifunction
: 1 x 160p D-SUB (female) - Also see table below
• USB I/O
: 1 x TYPE B Conn. (female) Reserved for future use
• AC Power IN
: 1 x Std IEC Inlet
• AC Power OUT
: 1 x Std IEC Outlet (5A Max)
**Tested at recommended resolutions. The RGB output signal is at same resolution and sync as the
RGB input. The output is working even if the display unit is turned off, but power cable/supply must
be connected/provided.
HATTELAND® Multifunction Cable:
The factory standard cable is delivered with the following connectors.
Standard cable length is 30cm. Art: #1=VSD100692-4 / #2=VSD100692-3
• COM1
#1
• Composite Video IN
• COM1
#2
• Composite Video IN
• COM Touch
Customized cables are possible to support more built-in signals, like: RS-232,
RS-485, RS-422/RS-485, Buzzer, ON/OFF, Touch (RS-232 or PS/2), 1 x S-Video IN, 3 x
Composite Video IN, Remote External User Controls, Alternative Keypad interface (i2c)
and reserved for other signals. Custom cable lengths can be manufactured.
User Controls:
On front bezel - Keypad control (IP66) xxx-xxAx models:
• Power On/Off and On Screen Display Menu (push button)
• Brightness Control (up/down - push buttons)
• Hotkeys (left/right - push buttons)
• Mode Status Red/Green Illuminated LED-Ring Indicator
On front bezel - Potmeter control (IP66) xxx-xxBx models:
• Power On/Off and On Screen Display Menu (push button)
• Brightness Control (rotary control)
• Hotkeys (left/right - push buttons)
• Mode Status Red/Green Illuminated LED-Ring Indicator
• Speaker / Buzzer
Environmental Considerations:
• Operating
: Temperature -15 deg. C to +55 deg. C
- Humidity up to 95%
• Storage
: Temperature -20 deg. C to +60 deg. C
- Humidity up to 95%
• IP Rating
: Protection (EN60529): IP66 front - IP20 rear
• Compass Safe Dist.
: JH 27T11 MMD - Std: 50cm Steering: 30cm
Safety Considerations:
Even although the test conditions for bridge units provide for a maximum
operating temperature of 55°C, continuous operation of all electronic
components should, if possible, take place at ambient temperatures of only
25°C. This is a necessary prerequisite for long life and low service costs.
Available Accessories:
• Cables
= Custom Multifunction Cable to support more signals
• JH 27BRD STD-A1 = Table/Foot EN60945 Tested Bracket
• JH 27VED STD-B1 = Wall/Vesa Mount Bracket
• JH 27TWC STD-A1= Water Cover
* Please see user manual for drawings/measurements
Factory Options:
• Optical Bonding Technology
• Color Calibrated models (ECDIS)
& C E R T I F I C A T E S
56
INB100036-1 (Rev 21)
: 1 x 9p D-SUB (female) - RS232
: 3 x BNC (female)
: 1 x 9p D-SUB (female) - RS232
: 3 x BNC (female)
: 1 x 9p D-SUB (female) - For touch screen
GL - Germanischer Lloyd
BV - Bureau Veritas
2/2
Advertisement
Table of Contents
