Build Job - Xerox WorkCentre Pro 90 Quick Reference Manual

Build Job

Use this feature to build a job that requires different settings for each page. For
example, if a set of documents consists of some pages with text and some with
photos, the appropriate setting for each original can be applied and the job can still
be completed as a single job.
HINT: Quantity, Stapling and Collation options can be adjusted at any time and will
assume the values of the last job segment.
To use Build Job, split the job into programming and scanning segments. Ensure
Build Job is selected and program and scan the first segment. Continue to program
and load segments until the whole job has been scanned. Select End Build Job
when the entire job has been scanned.
Build Job can also be used to insert precut tabs into a collated output set. When
you produce tabs using Build Job, the CopyCentre/WorkCentre Pro automatically
shifts the image to ensure your tabs are printed in the correct position. There is no
need for you to perform any additional margin shift operations.
HINT: To ensure quality output, always load precut tab stock into the appropriate
paper tray in reverse collated order.
X C C C65/C75/C90 W
EROX OPY ENTRE
C P 65/75/90 Q
ORK ENTRE RO
R G
UICK EFERENCE UIDE
P 3-25
AGE