Bound Originals - Xerox WorkCentre Pro 90 Quick Reference Manual

Bound Originals

This feature is used to copy pages from bound documents onto separate single-
sided or double-sided pages.
The bound original is placed face down on the Document Glass with the spine of
the book lined up with the marker on the rear edge of the glass. Align the top of the
bound original against the rear edge of the document glass. Do not close the
document handler during the copying process if Auto Reduce/Enlarge is selected.
HINT: If necessary, apply a little pressure to the center of the book to flatten it
during scanning. Do not close the document handler and apply pressure. Applying
pressure to the closed document handler may result in machine damage.
Options:
The feature is switched off.
O
FF
Copies only the page on the left when looking at the open book, face up.
L P
EFT AGE
Copies only the page on the right when looking at the open book, face up.
R P
IGHT AGE
Copies both pages of an open book and places each page on a separate sheet of
B P
OTH AGES
paper.
Erases a specified area from the center of the book to eliminate unwanted marks
B E
INDING RASE
caused by scanning the binding. When Left Page or Right Page is selected between
0 and 1.0 inch can be erased. When Both Pages is selected, between 0 and 2.0
inches can be erased.
P 3-12
AGE
X C C C65/C75/C90 W
EROX OPY ENTRE
C P 65/75/90 Q
ORK ENTRE RO
R G
UICK EFERENCE UIDE