Build Job - Xerox CopyCentre C32 Quick Reference Manual

Spode QRG.book Page 28 Tuesday, May 13, 2003 10:51 AM

Build Job

Use this feature to build a job that requires different settings for each page. For
example, if a set of documents consists of some pages with text and some with
photos, the appropriate setting for each original can be applied and the job can still
be completed as a single job.
HINT: Quantity, Stapling and Collation options can be adjusted at any time and will
assume the values of the last job segment.
To use Build Job, split the job into programming and scanning segments. Ensure
Build Job is selected and programme and scan the first segment. Continue to
programme and load segments until the whole job has been scanned. Select End
Build Job when the entire job has been scanned.
P 3-28
AGE
X C C /W C
EROX OPY ENTRE ORK ENTRE
P 32/40 C Q R
RO OLOUR UICK EFERENCE
G
UIDE