Multi-Up - Xerox WorkCentre Pro 90 Quick Reference Manual

Multi-Up

This feature is used to create documents with multiple images. It is ideal for creating
handouts, storyboards or documents used for archival purposes.
NOTE: Originals must be loaded in the Document Handler when using this feature.
Options:
The feature is switched off.
O
FF
Use to enable the Multi-Up feature.
O
N
Multi-Up On options are as follows:
NOTE: The number of images will be limited by the minimum reduction value of
25% and the size of the selected output.
X C C C65/C75/C90 W
EROX OPY ENTRE
Use to select the image and load orientation of the input
O
RIENTATION
originals.
Selects the required number of Rows, between 1 and 6.
R
OWS
Selects the required number of columns, between 1 and 6.
C
OLUMNS
C P 65/75/90 Q
ORK ENTRE RO
R G
UICK EFERENCE UIDE
P 3-19
AGE