Connections - General; System Overview - Martin Easypix User Manual

Connections – general
This section lists some general principles that apply to Easypix
installations. Read "Safety Information" on page 3, "AC power" on page
17 and "Control data link" on page 19 before starting installation work.

System overview

Figure 6 gives an overview of the system layout and the cable
connections for the Easypix Power.
Warning! Do not exceed the maximum permitted number of
luminaires connected to one Easypix Power unit, i.e. 24 Easypix
300 luminaires or 6 Easypix 1200 luminaires or any mixture of
Easypix 300 and Easypix 1200 luminaires that is maximum 7.2
meters in length.
The Easypix system consists of:
1.
2.
16
Figure 6: Schematic cable and device layout
The Easypix Power that controls luminaires in response to a DMX
signal from a controller such as the Martin Light Fox™. The
Easypix Power also stores stand-alone programs that luminaires
can display without the need for a DMX controller.
Easypix 300 and Easypix 1200 luminaires.
Easypix user manual