Problems Using A Windows Environment - Xerox CopyCentre C118 System Administration Manual

The data format of the print
job does not match the print
environment of the client
(print data sent from the
client is in the binary
notation).
Print paper is out.
The selected transport
protocol does not match the
client.
When the required printing result is not obtained
The specified print language
is different from the print
language of the print data.

Problems using a Windows Environment

This section explains what to do when a problem occurs while using Microsoft Windows
OS. The possible causes, confirmation methods, and actions are as follows. If a
problem still exists after the corrective action has been performed, follow the Problem
Solving Procedures on page 111 to seek further assistance.
When using Windows 95/Windows 98/Windows Me – page 122
When using Windows NT 4.0/Windows 2000/Windows XP/Windows Server 2003 –
page 123
Xerox CopyCentre/WorkCentre 118 System Administration Guide
Cause Confirmation Method
Check the paper refilling
message on the control
panel.
Check the transport protocol
selected from the control
panel.
Cause Confirmation Method
Check the specified print
language and the print
language of the print data.

Problems using a Windows Environment

Set the logical printer name
to PSBIN to print a binary file
in the PostScript language.
–
Load the paper into the paper
tray. When changing the
paper size, specify the new
size, if required.
Select the transport protocol
matching the client.
Specify a print language
matching that of the print
data.
Action
Action
121